- Capacity
- 12K BTU
- SEER2
- 21.2
- Power
- 115 V
- HSPF2 (Region IV)
- 8.7
- Refrigerant
- R-454B
In stock
Shop by type
Wall-mount mini split heads
Wall-mounted ductless indoor heads from Cooper & Hunter, 6,000 to 36,000 BTU.
- Products
- 38
- Capacity
- 6K–36KBTU
- SEER2 up to
- 25.8
Loading products
Approved pairings
The outdoor units these heads pair with.
A head needs an outdoor unit. These are the manufacturer-approved outdoor units for the heads in this collection, the most-paired first. Each product page lists its own pairings.
SystemHyper Heat 36K Multi-Zone Outdoor Unit, without Shut-off ValvesCH-RHP36M-230VOApproved for 11 heads in this collection
System48K Multi-Zone Outdoor UnitCH-R48MES-230VOApproved for 11 heads in this collection
SystemHyper Heat 48K Multi-Zone Outdoor Unit, without Shut-off ValvesCH-RHP48M-230VOApproved for 11 heads in this collection- SystemHyper Heat 55K Multi-Zone Outdoor Unit, without Shut-off ValvesCH-RHP55M-230VOApproved for 11 heads in this collection
Buying guide
Choosing a wall-mount head
A wall-mount head hangs high on an inside wall and blows across the room. It is the most common mini split head and the simplest to install: the line set, drain and control wire leave through one three-inch hole behind the unit.
Pick where it hangs before you pick the model. It needs clear wall above head height and a short path outside for the line set. Size it to the room, about 20 BTU per square foot with 8 ft ceilings and average insulation, and pair it with a single-zone outdoor unit for one room or a multi-zone unit that runs several heads. Each head's page lists the outdoor units approved for it.
Right now this page lists 38 products: 38 wall-mount heads. Sizes run from 6,000 to 36,000 BTU, with SEER2 ratings from 18.7 to 25.8. Voltages on offer: 115 V and 208–230 V.
Common questions
Can I install a mini split myself?
Mounting, wiring and running the line set are within reach of a capable DIYer. The refrigerant connection, vacuum and charge should be done by a licensed HVAC technician in most states, and most warranties require it. We can point you to an installer in your area.
How do I know what size I need?
Use the system builder: enter the rooms and it sizes each one and shows only manufacturer-approved combinations. For vaulted ceilings, sunrooms or very old houses, call and we will size it by hand.
Do you ship nationwide?
Yes. Every system ships to all 50 states.
Can I return a unit?
No. All sales are final, so size it right first: the builder and the sizing guide are free, and a person confirms the pairing on every order. If anything arrives damaged, we handle the claim for you, and defects are covered by the manufacturer warranty.
Sizing help
Not sure which size?
The builder sizes each room and shows only the pairings Cooper & Hunter approves. The sizing guide explains the rules behind it.
A person checks the pairing on every order before it ships.
Monday to Friday, 8 AM to 5 PM Central
